Bootmod3 S58 ECU Tune for BMW M2 G87 / M3 G80 / M4 G82 G83 / X3M F97 / X4M F98
FITMENT
WARRANTY
SHIPPING
bootmod3 S58 ECU Tune for BMW M2, M3, M4, X3 M and X4 M
bootmod3 is an advanced cloud-based ECU flash-tuning platform developed by ProTuning Freaks for BMW vehicles equipped with the S58 engine, including the G87 M2, G80 M3, G82 and G83 M4, F97 X3 M and F98 X4 M.
The platform provides direct access to ECU flashing, ready-to-use OTS maps, CustomROM functionality, high-speed datalogging, diagnostics, map management and real-time vehicle monitoring through the bootmod3 web interface or mobile application for iOS and Android.
Once the required DME unlock has been completed, bootmod3 calibrates the factory engine control unit directly through the vehicle’s OBD port. Supported maps can be flashed in only a few minutes, allowing the vehicle to move between stock, Stage 1 and Stage 2 calibrations.
One compatible bootmod3 OTS map is included with the licence. The appropriate calibration can be selected based on the fuel used, installed performance hardware and intended use of the vehicle. Additional OTS maps and professional custom tuning are also available through the bootmod3 platform.
CustomROM V2 provides advanced functionality including AntiLag, on-the-fly map switching, Advanced Flex Fuel, Live Tuning, configurable torque management, custom boost-control strategies and integrated support for additional fuel and injection systems.
Whether your S58-powered BMW is a standard daily-driven vehicle or part of a high-performance build, bootmod3 provides one complete platform for tuning, diagnostics, datalogging, monitoring and future upgrades.
Estimated Performance Gains:
Stage 1:
Stage 1 ACN91 octane: up to 11% HP / 25% TQ
Stage 1 91 octane: up to 13% HP / 26% TQ
Stage 1 93 octane: up to 20% HP / 30% TQ
Stage 1 E30 octane: up to 28% HP / 36% TQ
Stage 2:
Stage 2 ACN91 octane: up to 13% HP / 28% TQ
Stage 2 91 octane: up to 22% HP / 34% TQ
Stage 2 93 octane: up to 23% HP / 34% TQ
Stage 2 E30 octane: up to 33% HP / 44% TQ
Stage 2 Race Gas: up to 33% HP / 44% TQ
Stage 2 E50 octane: up to 37% HP / 46% TQ
Performance figures are estimates compared with the factory calibration. Actual gains may vary depending on fuel quality, vehicle condition, installed hardware, DME software and environmental conditions.
Features
- One compatible bootmod3 OTS map included
- CustomROM V2 functionality on supported vehicles and maps
- AntiLag for stationary launches and rolling acceleration
- Four-map on-the-fly switching using steering-wheel controls
- Advanced Flex Fuel support for different ethanol blends
- Live Tuning through the bootmod3 Map Editor
- Integrated Map Editor with thousands of available tuning tables
- High-speed datalogging of advanced DME channels
- Ethanol-content display through the factory instrument cluster
- Custom boost-control and launch-control strategies
- Configurable transmission torque management
- REV2 controller integration for additional injection and fuel systems
- Cloud-based flashing through web, iOS and Android applications
- Live Dash gauges for real-time vehicle monitoring
- Read and clear diagnostic trouble codes
- Reset learned engine adaptations
- Cloud storage for maps and datalogs
- Return the vehicle to its original stock calibration
- Professional custom tuning through the bootmod3 tuner network
Installation
A bootmod3 WiFi Adapter or compatible OBD ENET cable is required and sold separately.
Once the DME has been unlocked where required, bootmod3 is activated and flashed through the vehicle’s OBD port.
EURO TUNED can provide local installation, licence activation and initial OTS map setup in Ireland.
Maps and Vehicle Customisation
Depending on the selected OTS or custom map, available options may include:
- Stage 1 and Stage 2 calibrations
- ACN91, 91, 93, E30, E50 and Race Gas maps
- Four-map on-the-fly switching
- Advanced Flex Fuel support
- AntiLag functionality
- Exhaust burble adjustments
- Cold-start noise reduction
- Max Cooling Mode
- Exhaust-flap adjustments
- Top-speed limiter removal
- Boost-by-gear reduction
- Recalibrated Sport Displays
- Transmission torque-limiter adjustments
- Custom throttle mapping
- Maps for upgraded turbochargers and additional fuel systems
- Advanced custom tuning through the bootmod3 Map Editor
Feature availability depends on the vehicle, DME software, installed hardware and selected calibration.
DME Unlock Requirements
BMW S58 vehicles may require an OBD patch, Bench Unlock or another supported DME unlock method before bootmod3 can flash the factory DME.
Vehicles running November 2019 or newer DME software may require an unlock or patch before OBD flashing. The exact unlock requirement depends on the DME production date and installed software version.
G80/G81 M3, G82/G83 M4 and G87 M2 vehicles typically require the DME to be unlocked before bootmod3 flashing. F97 X3 M and F98 X4 M unlock requirements may vary depending on the DME production date and installed software version.
Contact EURO TUNED before purchasing and send us your VIN or vehicle details. We will check the likely unlock requirement and explain the correct process.
When a DME unlock is required, EURO TUNED can arrange the required unlock through our trusted specialists. The exact process will depend on your vehicle, DME and software version.
Once unlocked, EURO TUNED can complete the bootmod3 activation, software setup and installation of your selected OTS map.
Licence Delivery and Professional Installation
This product is a digital software licence. Your bootmod3 activation key will be sent electronically to the email address entered with your order.
The vehicle owner’s email address should be used for activation so the customer retains full access to their bootmod3 account, maps, datalogs and future adjustments.
EURO TUNED is an authorised bootmod3 dealer in Ireland and can provide professional installation, OTS map setup, local support and FEMTO unlock services.
Please note: A bootmod3 WiFi Adapter or compatible OBD ENET cable is required and sold separately. Your bootmod3 activation key will be delivered electronically to the email address entered with your order.