Bootmod3 N63TU ECU Tune for BMW 550i, 650i, 750i, X5 xDrive50i & X6 xDrive50i
FITMENT
WARRANTY
SHIPPING
bootmod3 N63TU ECU Tune for BMW 550i, 650i, 750i, X5 and X6
bootmod3 is an advanced cloud-based ECU flash-tuning platform developed by ProTuning Freaks for BMW F-Series vehicles equipped with the N63TU engine.
Supported vehicles include the BMW F07 550i Gran Turismo, F10 and F11 550i, F06, F12 and F13 650i, F01 and F02 750i or 750Li, F15 X5 xDrive50i and F16 X6 xDrive50i.
The platform provides direct access to ECU flashing, ready-to-use OTS maps, high-speed datalogging, diagnostics, map management and real-time vehicle monitoring through the bootmod3 web interface or mobile application for iOS and Android.
Once the required DME unlock has been completed, bootmod3 calibrates the factory engine control units directly through the vehicle’s OBD port. Supported maps can be flashed in only a few minutes, allowing the vehicle to move between stock, Stage 1 and Stage 2 calibrations.
One compatible bootmod3 OTS map is included with the licence. The appropriate calibration can be selected based on the fuel used, installed performance hardware and intended use of the vehicle. Additional OTS maps and professional custom tuning are also available through the bootmod3 platform.
The platform also provides access to high-speed datalogging, Live Dash monitoring, diagnostic functions, cloud storage and advanced map customisation for ethanol blends, Race Gas, upgraded turbochargers and additional injection systems.
Whether your N63TU-powered BMW is a standard daily-driven vehicle or part of a high-performance build, bootmod3 provides one complete platform for tuning, diagnostics, datalogging, monitoring and future upgrades.
Estimated Performance Gains:
Stage 1:
Stage 1 ACN91 octane: up to 13% HP / 20% TQ
Stage 1 91 octane: up to 16% HP / 22% TQ
Stage 1 93 octane: up to 20% HP / 24% TQ
Stage 2:
Stage 2 ACN91 octane: up to 18% HP / 22% TQ
Stage 2 91 octane: up to 21% HP / 25% TQ
Stage 2 93 octane: up to 23% HP / 26% TQ
Stage 2 E30 octane: up to 26% HP / 28% TQ
Performance figures are estimates compared with the factory calibration. Actual gains may vary depending on fuel quality, vehicle condition, factory power output, installed hardware, DME software and environmental conditions.
Features
- One compatible bootmod3 OTS map included
- Cloud-based flashing through web, iOS and Android applications
- Windows and macOS support
- High-speed datalogging of hundreds of diagnostic channels
- Datalog sharing and built-in charting
- Cloud storage for maps and datalogs
- Live Dash gauges for real-time vehicle monitoring
- Read and clear diagnostic trouble codes
- Reset learned engine adaptations
- ECU power-reset functionality
- Return the vehicle to its original stock calibration
- Re-lock the DME to factory programming where supported
- Integrated bootmod3 Map Editor
- Professional custom tuning through the bootmod3 tuner network
Installation
A bootmod3 WiFi Adapter or compatible OBD ENET cable is required and sold separately.
Once the required DME unlock has been completed, bootmod3 is activated and flashed through the vehicle’s OBD port.
Stage 2 maps require the appropriate supporting hardware. Exact requirements depend on the selected calibration and installed performance components.
This licence supports N63TU-powered F-Series vehicles only. Earlier non-TU N63 engines and BMW E-Series vehicles are not supported.
EURO TUNED can provide local installation, licence activation and initial OTS map setup in Ireland.
Maps and Vehicle Customisation
Depending on the selected OTS or custom map, available options may include:
- Stage 1 and Stage 2 calibrations
- ACN91, 91, 93, E30, ethanol-blend and Race Gas tuning
- Aggressive-burble Stage 2 map versions
- Map customisation through the bootmod3 Map Editor
- Max Cooling Mode
- Cold-start noise reduction
- Exhaust-flap adjustments
- Top-speed limiter removal
- Custom TMAP-sensor adjustments
- Custom high-pressure fuel-pump settings
- Boost-by-gear reduction
- DTC deactivation on supported calibrations
- Recalibrated Sport Displays
- Custom throttle mapping
- Methanol-injection tuning
- Backend flash maps for piggyback systems
- Advanced custom tuning for upgraded turbochargers
Feature and map availability depends on the vehicle, DME software, installed hardware and selected calibration.
DME Unlock Requirements
Some BMW N63TU vehicles require a Bench Unlock or OBD patch before bootmod3 can flash the factory DMEs.
Unlock requirements depend on the installed DME software and any manufacturer software updates previously completed on the vehicle.
Compatibility for F01 750i and F02 750Li vehicles should be confirmed using the VIN before purchasing.
Contact EURO TUNED before purchasing and send us your VIN or vehicle details. We will check the likely unlock requirement, confirm vehicle compatibility and explain the correct process.
When a Bench Unlock or OBD patch is required, EURO TUNED can assist with the correct unlock process before bootmod3 activation and installation of the selected OTS map.
Licence Delivery and Professional Installation
This product is a digital software licence. Your bootmod3 activation key will be sent electronically to the email address entered with your order.
The vehicle owner’s email address should be used for activation so the customer retains full access to their bootmod3 account, maps, datalogs and future adjustments.
EURO TUNED is an authorised bootmod3 dealer in Ireland and can provide professional installation, OTS map setup, local support and assistance with DME unlock requirements.
Please note: A bootmod3 WiFi Adapter or compatible OBD ENET cable is required and sold separately. Your bootmod3 activation key will be delivered electronically to the email address entered with your order.